I took the cap off and the rubber O ring and valve nipple came out and won't fit back in and the cap go back on. Doesn't fit. And I don't know if I lost a spring or washer . ( The Nozzle Part)
The valve stem should screw back in (if you don't have a tool use a cheap fork and bend the 2 outside teeth out or the way) it shouldn't be to hard. If it does not screw back in it will need replacing.
Answers & Comments
The valve stem should screw back in (if you don't have a tool use a cheap fork and bend the 2 outside teeth out or the way) it shouldn't be to hard. If it does not screw back in it will need replacing.