IBM Infoprint 1352 won't power on
As a technician for a small school district (we have a school) I have a printer that will not power on. Are there any safety overrides to prevent power from coming on? How do I get the power supply out to check it? Any way to get documentation for this printer?
Thanks,
****
Thanks,
****
Office Equipment & Supplies - IBM - Infoprint 1352 Laser Printer
Answers & Comments
LVPS (low voltage power supply).
To get to it remove the right side cover (to do this, take the toner cart out and you'll see a screw on the inner right side, remove this. Remove the rear cover, the if you look through the top of the metal frame on the inner right side you'll see another screw, remove this. the cover will then come off.
Remove fuser assembly
Remove the LVPS mounting screws (2) from the rear of the bottom pan.
Pull the LVPS assembly far enough out from the right side of the printer to disconnect the fuser lamp cable.
Warning: The LVPS assembly may be difficult to remove from the printer. Do not use excessive force in the removal.
Remove the LVPS access plate.
Disconnect the interconnect card cable from the LVPS.
Remove the LVPS.