The ice thicknes control is located on the bottom left. it has a wire going to it and ha a black rubber bottom. depending on the position it is secured. will determine the ice thickness. loosen the two screws and push it higher for smaller cubes and lower for bigger. If you are having problems with it. There is the possibility it is dirty and sticking.
Answers & Comments
The ice thicknes control is located on the bottom left. it has a wire going
to it and ha a black rubber bottom. depending on the position it is secured.
will determine the ice thickness. loosen the two screws and push it higher
for smaller cubes and lower for bigger. If you are having problems with it.
There is the possibility it is dirty and sticking.