First make sure you have power. If the digital control unit lights up and you can set temp and time, put the temp at the highest setting. Wait until the red light turns on wait a few minutes. Check the element, it should be glowing cherry red. If it doesn t get red hot then the element is bad or there is a bad wire that is broken or shorted out. Good Luck
Answers & Comments
First make sure you have power. If the digital control unit lights up and you can set temp and time, put the temp at the highest setting. Wait until the red light turns on wait a few minutes. Check the element, it should be glowing cherry red. If it doesn
t get red hot then the element is bad or there is a bad wire that is broken or shorted out. Good Luck