I'm 500 miles for a dealer and the the oil will need to be changed soon. I've changed my own oil for many years but on the Bentley I don't know what kind of filter it has nor where it is located. Also, how to I reset the oil service message in the infomation center after the oil is changed?
It is recommended to only change the filter every 3rd oil change on the Bentley. Changing the oil is pretty straightforward - crawl underneath and drain. Refill to proper level.
To reset the service light, You only need to hold the left odometer reset button while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display: OIL SERVICE or INSPECTION with RESET or RE. Release the button and press it again for another 5 or so seconds until RESET or RE flash. While the display flashes, press the button one more time briefly.
Done!!
Thanks for using FixYa - please accept this answer to clear it from the work queue.
Turn off the radio and turn the key to the on position.
Press and hold DISP knob, when info comes on window press the seek arrow in tell you find what you need to reset.
Press the #1 button and it will beep.
Go back to the seek arrow and find exit.
Press the DISP knob again and you are done.If yours is controlled thru the radio...
Turn off the radio and turn the key to the on position. Press and hold DISP knob, when info comes on window press the seek arrow in tell you find what you need to reset. Press the #1 button and it will beep. Go back to the seek arrow and find exit. Press the DISP knob again and you are done.
Answers & Comments
It is recommended to only change the filter every 3rd oil change on the Bentley.
Changing the oil is pretty straightforward - crawl underneath and drain.
Refill to proper level.
To reset the service light,
You only need to hold the left odometer reset button while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display:
OIL SERVICE or INSPECTION with RESET or RE.
Release the button and press it again for another 5 or so seconds until RESET or RE flash.
While the display flashes, press the button one more time briefly.
Done!!
Thanks for using FixYa - please accept this answer to clear it from the work queue.
:D
If yours is controlled thru the radio...
Turn off the radio and turn the key to the on position.
Press and hold DISP knob, when info comes on window press the seek arrow in tell you find what you need to reset.
Press the #1 button and it will beep.
Go back to the seek arrow and find exit.
Press the DISP knob again and you are done.