Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then go to LAN settings change ip as you want then save settings and resatrt router. You can also enable DHCP on it with specific ip range. Let me know if you need further assistance. Thanks for using FixYa.
Answers & Comments
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then go to LAN settings change ip as you want then save settings and resatrt router. You can also enable DHCP on it with specific ip range. Let me know if you need further assistance. Thanks for using FixYa.