In the middle of cutting a head, the clipper all of a sudden won't turn on when I move the switch to "on." No buzzing or movement at all. The outlet works just fine. Help!!!
Purchased new in January 2015.
Irons - Andis - Fade Master Clipper Equipped With Fade Blade 01690
Answers & Comments
The plug is probably not connected to the power cable. Could also be a bad cable or the connection to the clipper.
Good start. You have probably eliminated 1/2 of the possible faults. It's probably a bad connection at the plug end of the wire. You could test it with an ohm meter if you had one and know what to do or you could just replace the plug on the other end of the wire. If you have never done that sort of thing, I would find someone that could do it for you since you are working with 115v and it can kill you if you do it wrong.
Thanks!
You might have fried your power source
Sorry this was intended for the Wahl hero Clippers