IN THE STANDBY MODE THE MONITOR STOPPED WORKING. THE POWER LIGHT IS ON,BUT THE SCREEN IS BLACK. IF I POWER THE MONITOR OFF AND BACK ON, IT HAS A LOW SCREEN IMAGE FOR ABOUT THREE SECONDS AND GOES TO BLACK WITH THE POWER LIGHT BACK TO GREEN. CAN REPEAT THIS PROCEDULE OVER AND OVER WITH THE SAME OUTCOME. I LIKE THE MONITOR,BUT ALSO WOULD LIKE TO REPAIR IT. ANY HELP TO REPAIR POWER SUPPLY
Computers & Internet - Envision - G22LWK 22" LCD Monitor
The main problem you will find is bulging capacitors in the power supply, but not all will fall in that category. If you are handy with the soldering iron replace all the electrolytic capacitors,especially all the ones that are bulging at the top "change them" if you have a capacitor meter, that will help speed things up.
Answers & Comments
The main problem you will find is bulging capacitors in the power supply, but not all will fall in that category. If you are handy with the soldering iron replace all the electrolytic capacitors,especially all the ones that are bulging at the top "change them" if you have a capacitor meter, that will help speed things up.