The siren is a security feature that indicates that the tamper switch on the back of the front lock body is not pressed in. Make sure the lock is fully installed and the siren should stop.
This is typically experienced when a user "bench tests" the unit without actually installing it on a door.
A note about PDF files: If you cannot view a given file, you need to first install Adobe Reader. You can get the free download here: http://get.adobe.com/reader/
Answers & Comments
The siren is a security feature that indicates that the tamper switch on the back of the front lock body is not pressed in. Make sure the lock is fully installed and the siren should stop.
This is typically experienced when a user "bench tests" the unit without actually installing it on a door.
This is a link to the installation manual. If your results vary from the expected, contact Axxis Biometrics support for assistance:
http://www.axxisbiometrics.com/images/upload/File/pdfs/BD1HS_Complete_User_Manual.pdf
http://www.axxisbiometrics.com/support/
A note about PDF files: If you cannot view a given file, you need to first install Adobe Reader. You can get the free download here:
http://get.adobe.com/reader/
Good luck!