Intermec EasyCoder PC4 Label Printer
I connected the printer using a usb cable, downloaded the usb drivers and the printer drivers from the website. But the thing still fails to print. Cant even print a test page. Pliz help..
Office Equipment & Supplies - Intermec - EasyCoder - EasyCoder PC4 Label Printer
Answers & Comments
JUST PUT IN TO PORT COM3 AND GO.
Intermec does not always choose com3 three. Look at the properties of port numbers in device manager. One of them will say Intermec, that is the port number.
Is the printer set as your default printer?
Try the Seagull driver, at http://www.seagullscientific.com/aspx/thermal_95.aspx.
Scroll down to Intermec, downlaod and unzip.
Use the DriverWizard.exe to set up your printer with a new name (delete the original after you're sure this worked).