Is drum, blade and deleloper replacement something I can do myself?
I have a copystar CS-1510. It makes a smudge along one side at regular intervals. I would like to replace the drum, blade and developer. Is this something that a pretty handy person can do himself?? Help!!Mike W
Office Equipment & Supplies - Copystar - CS-1510 Copier
Answers & Comments
Yes, I would suggest a large table with a plastic cloth, so you don't have to worry about toner spills.
It is a bit messy, but will save you a lot of money.
Word of caution : the drum should come with a white powder on it, this is to lubricate the blade; otherwise it will scrape it and make lines on the drum, in the case it does not have the powder, add some waste toner to it and the blade so it can slide on the drum smoothly.
Also emty the waste toner in a garbage bag and seal after words.