Is replacing a windshield on a 2009 Suzuki Burgman 650 motor scooter difficult? The factory on is 26 inches and I wanted to put an aftermarket 31 inche on
the windshield is held in place by a bracket (rack) with a coting (strip) of polysealer .. Just use a hot knife and cut it off.(the sealer) Now extend and remake the rak as necessary for your new windshield. get some ribbon sealer or poly sealer, apply a strip,, install your new windshield And your set>> ou may need to do a bit of dismantling to get to get to the winddshield.. but nothing major. a fe knots and bolts,, if any at all.
Answers & Comments
Actually it aint difficult.. Just be careful..
the windshield is held in place by a bracket (rack) with a coting (strip) of polysealer .. Just use a hot knife and cut it off.(the sealer) Now extend and remake the rak as necessary for your new windshield. get some ribbon sealer or poly sealer, apply a strip,, install your new windshield And your set>> ou may need to do a bit of dismantling to get to get to the winddshield.. but nothing major. a fe knots and bolts,, if any at all.