IS THE BALL JOINT ON THE LOWER CONTROL ARM ON A 20O7 DODGE CARAVAN 3.3 LITER REPLACEABLE. THE HAYNES MANUAL SAID THE THE BALL JOINT IS NOT REPLACEABLE THE ENTIRE CONTROL ARM HAS TO BE REPLACED
Likely it can be replaced as a separate component but the rivets will need cut (drilled) out. Take "Steves" suggestion and see if parts store can get the component. Then be sure the rivet head can be ground off or drilled.
Answers & Comments
Likely it can be replaced as a separate component but the rivets will need cut (drilled) out. Take "Steves" suggestion and see if parts store can get the component. Then be sure the rivet head can be ground off or drilled.