Is there any software that allows for a project that is bigger than 4.7GB to span across multiple disks. This software is to communicate with a Rimage 2000i
Most burning software will support burning across multi disks. However alot of the OEM versions that come with the drive or your computer are basic programs and do not support this.
I am currently looking at the main 2 programs that I use to see if they support your Rimage 2000i.
Let me know if you have any questions before I get back with you.
It has been awhile since I had to look up this info and I have found that they all have changed their sites so they do not show a list of there supported drives any more.
However you can use the software from NTI, NERO or ROXIO to be able to do what you want too.
Let know if you have any more questions or problems.
It has been awhile since I had to look up this info and I have found that they all have changed their sites so they do not show a list of there supported drives any more.
However you can use the software from NTI, NERO or ROXIO to be able to do what you want too.
Let know if you have any more questions or problems.
Hi, You an split a file into 2 halves using winrar software. To download the software click on the link below : http://dw.com.com/redir?edId=3&siteId=4&oId=3001-2250_4-10007677&ontId=2250_4&spi=31c9931fda354b175c95081132532f0c&lop=txt&tag=idl2&pid=11328346&mfgId=113677&merId=113677&[email protected]&destUrl=http%3A%2F%2Fsoftware-files-l.cnet.com%2Fs%2Fsoftware%2F11%2F32%2F83%2F46%2Fwrar393.exe%3Fe%3D1278036052%26h%3D7a42ec6bc16850f8b386169c1c963a9d%26lop%3Dlink%26ptype%3D1901%26ontid%3D2250%26siteId%3D4%26edId%3D3%26spi%3D31c9931fda354b175c95081132532f0c%26pid%3D11328346%26psid%3D10007677%26fileName%3Dwrar393.exe Instructions on how to split files : First Open WINRAR. Then right click on the file you want to select and select Add to Archive then a window will open from Rar..... At the bottom there is a Tab saying "Spilt to Volume, Bytes" In the box enter a figure... Remember bytes ... For e.g. if u enters 10000000 that will be equal to 9.53 MB ... Remember you have to enter the value in bytes... So enter a big value.. And that’s it Your File will be split into your requires no of file... then you can burn the files on 2 separate discs.. Good Luck!
This was actually a practical solution to what you asked. if you didn't like it than atleast you should have not given a bad rating. I guess! Anyways thanks for your rating.
Hello, This was actually a practical solution to what you asked. if you didn't like it than atleast you should have not given a bad rating. I guess! Anyways thanks for your rating.
Answers & Comments
X1xTRIPx1x
Most burning software will support burning across multi disks. However alot of the OEM versions that come with the drive or your computer are basic programs and do not support this.
I am currently looking at the main 2 programs that I use to see if they support your Rimage 2000i.
Let me know if you have any questions before I get back with you.
Issken
http://www.fixya.com/users/issken
x1xTRIPx1x
It has been awhile since I had to look up this info and I have found that they all have changed their sites so they do not show a list of there supported drives any more.
However you can use the software from NTI, NERO or ROXIO to be able to do what you want too.
Let know if you have any more questions or problems.
Issken
http://www.fixya.com/users/issken
Its cool that the program will span, but the real kicker is if when it needs another disk the Rimage 2000i robot arm will pick up another disk.
Hi,
You an split a file into 2 halves using winrar software.
To download the software click on the link below :
http://dw.com.com/redir?edId=3&siteId=4&oId=3001-2250_4-10007677&ontId=2250_4&spi=31c9931fda354b175c95081132532f0c&lop=txt&tag=idl2&pid=11328346&mfgId=113677&merId=113677&[email protected]&destUrl=http%3A%2F%2Fsoftware-files-l.cnet.com%2Fs%2Fsoftware%2F11%2F32%2F83%2F46%2Fwrar393.exe%3Fe%3D1278036052%26h%3D7a42ec6bc16850f8b386169c1c963a9d%26lop%3Dlink%26ptype%3D1901%26ontid%3D2250%26siteId%3D4%26edId%3D3%26spi%3D31c9931fda354b175c95081132532f0c%26pid%3D11328346%26psid%3D10007677%26fileName%3Dwrar393.exe
Instructions on how to split files :
First Open WINRAR.
Then right click on the file you want to select and select Add to Archive then a window will open from Rar.....
At the bottom there is a Tab saying "Spilt to Volume, Bytes"
In the box enter a figure... Remember bytes ... For e.g. if u enters 10000000 that will be equal to 9.53 MB ...
Remember you have to enter the value in bytes... So enter a big value..
And that’s it Your File will be split into your requires no of file...
then you can burn the files on 2 separate discs..
Good Luck!
Hello,
This was actually a practical solution to what you asked. if you didn't like it than atleast you should have not given a bad rating. I guess! Anyways thanks for your rating.