LabelWriter 400 or 450 Series Including the Duo and Twin Turbo I ran the self test and it cleared the problem.
Ensure the LabelWriter is powered on (solid blue light on the front of the LabelWriter) with labels currently loaded.
Press and hold down on the form feed button, after about 5-10 seconds the blue light will begin to flash. (Click here to see an image of the form feed button.) Once the blue light begins to flash, immediately let go of the form feed button. The LabelWriter should be in self test mode, printing labels with varying line patterns.
To end the self test, press the form feed button. The self test will not end automatically, you must press the form feed button to end the self test.
Having the same problem here... very random... send a print job of labels and it will print the whole lot, or freeze at random points but always halfway through a label... no error message... unplug usb and replug doesnt do anything, but unplug and replug power and off it goes printing more lables but may even freeze again after only a few more have come out... also, every day the first print job of the day prints half the label and pauses for about 10 seconds then keeps going...
- Windows XP Pro SP3 - LabelWriter 400 as supplied out of the box - Genuine DYMO labels
Answers & Comments
LabelWriter 400 or 450 Series Including the Duo and Twin Turbo
I ran the self test and it cleared the problem.
Having the same problem here... very random... send a print job of labels and it will print the whole lot, or freeze at random points but always halfway through a label... no error message... unplug usb and replug doesnt do anything, but unplug and replug power and off it goes printing more lables but may even freeze again after only a few more have come out... also, every day the first print job of the day prints half the label and pauses for about 10 seconds then keeps going...
- Windows XP Pro SP3
- LabelWriter 400 as supplied out of the box
- Genuine DYMO labels
Calibrate the Printer !