It looks that water is leaking from the - Culligan water softner
It looks that water is leaking from the brine tank. It is very wet around the tank. I cannot see the water leaking though. I have a feeliing it is happening at midnight when it recycles the brine. Somehow the water overflows at that time. How can I check it? I am not finding the manual to simulate it building of brine during day.
Measuring Tools & Sensors - Culligan - Sediment Water Filter
Answers & Comments
Look down the tube (where the float assembly is) there should only be about 10-12" of water in there. For water to reach the brine tank over flow the tank would have to be 3/4 of water. Brine tanks can develop leaks over time if they were set on uneven ground or if any rocks or debris are under it. If there is no evidence of water running down the side of the brine tank this is the most likely cause. Also if it has been leaking for some time there will salt buildup around the brine tank. Check the water softener for any leaks also. At times a small leak from the softener will find it's way over to the brine tank and collect around the bottom of it.
RJ