There is a little lever on the back of the free arm at the bottom. Push the lever to the right and that will lower the feed dog.
My Janome Memory Craft 3000 suddenly started skipping stitches. After cleaning out the lint as well as I could, the machine won't pull the bobbin thread up. Any ideas?
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
There is a little lever on the back of the free arm at the bottom. Push the lever to the right and that will lower the feed dog.
My Janome Memory Craft 3000 suddenly started skipping stitches. After cleaning out the lint as well as I could, the machine won't pull the bobbin thread up. Any ideas?