Ivg got a 2005 Nissan Almera Tino 1800 petrol Ive got a problem still, I cant find an OBD reader that works with it,
It now wont start, OBD meters Ive tried failed to link Im sure its a sensor problem, but Not the MAF as Ive changed that, symptoms were loss of revs when pushed throttle pedal more & more as time went on bad fuel consumption, then only 1/8throttle worked & no more the 2000rpm & now its a non starter
Cars & Trucks - Nissan - Almera - 2005 Nissan Almera Tino
Answers & Comments
Check fuses and relays --check for power[ fuse ] to the port on quit a few vehicles usually the accessory fuse and obdll port are same ==the following link shows what pins to check with a meter if you have power to the port then start checking your harness,connections and computers
OBDII On Board Diagnostic System Does My Car Have OBD II The Connector...
like i said if not linking and obdll port is good start looking at computer and wiring to obdll port is your up link to the vehicles computer system so some thing like computer failure can cause these problems