Jobs get stuck in Print server
I have an Edimax PS-1206U connected to a Samsung 3560 Printer and 12 computers via tcp/ip.
When printing users are frequently getting to a point where they have sent 90% of the document then stops, eventually timing out. The print server then has to be reset before anyone can print again.
The server light stays green untill the print server has been reset and it will stop responding via the server management software, meaning it has to be hard rebooted.
Reseting the server does fix the issue but this is becoming more and more frequent. it used to occur evey few weeks, now it has gotten to 4-5 times a day.
I have tryed several things, Replaced ethernet cable between Print server and network hub, replaced the print server with another identical and configured the same,replaced the usb cable to printer. None of these have worked.
When printing users are frequently getting to a point where they have sent 90% of the document then stops, eventually timing out. The print server then has to be reset before anyone can print again.
The server light stays green untill the print server has been reset and it will stop responding via the server management software, meaning it has to be hard rebooted.
Reseting the server does fix the issue but this is becoming more and more frequent. it used to occur evey few weeks, now it has gotten to 4-5 times a day.
I have tryed several things, Replaced ethernet cable between Print server and network hub, replaced the print server with another identical and configured the same,replaced the usb cable to printer. None of these have worked.
Computers & Internet - Edimax - PS - PS-1206U (PS1206U) Print Server