Jura impressa s8, the display shows" please wait" and doesn't switch to the Coffee Ready
Did anyone have this problem ? the machine does make steam, also when i turn it on the coffee group moves freely to the right positions, but the machine doesn't switch to the Coffee Ready display.
Coffee Makers & Espresso... - Jura Capresso - Impressa - Impressa S8 Coffee Maker, Espresso Machine
Answers & Comments
This error is because:
1- Flow meter is blocked & not sending signal of water flow.
2- Entire hydraulic system is filled with Calcium deposits and slowed down flow of water.
Solution:
1- Open the machine and manually clean flow meter. It is located between the water tank & the pump.
2- Follow this by manually descaling the machine. Seelink. Do not use automatic descaling method suggested by Jura.
Stop using Filter cartridges as the machine reminders for descaling are silenced by use of filters. Services Unlimited Inc Parts Guru Since 1988
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a