Ok, let's test it. We need 3 things for a motor to run. Fuel, spark and air/compression.
This first test you always start with as it will eliminatethe need to test for spark and air.
Spray some carburetor cleaner, gum out, into the plug hole
Reinstall the plug
Spraysome into the carburetoras well.
Now give 2 slow pulls, then pull it as u normally would.
If it starts but only runs for a few seconds, you know it's definitelythe carburetor... if that's the case then it needs to be adjustedwith the adjustment needles on the carburetor, which I can help you with as well.
Answers & Comments
Ok, let's test it. We need 3 things for a motor to run. Fuel, spark and air/compression.
This first test you always start with as it will eliminatethe need to test for spark and air.
Spray some carburetor cleaner, gum out, into the plug hole
Reinstall the plug
Spraysome into the carburetoras well.
Now give 2 slow pulls, then pull it as u normally would.
If it starts but only runs for a few seconds, you know it's definitelythe carburetor... if that's the case then it needs to be adjustedwith the adjustment needles on the carburetor, which I can help you with as well.
Let me know how you made out
Brian