Just picked up a Marantz SR-19, Everything looks like it works but I get No sound out of it. Unfortunately, there is NO remote and was wondering if there is a setting like Mute or a speaker select on the remote. I've tried the 2 Front R &L outputs as well as the Center outs and get nothing while trying the FM, CD, Vid etc inputs. I do hear a relay click when the power button is turned on. OR do I have bigger problems?
A Mute indicator would tell you if it was muted. Make sure no Tape or Multichannel Input are selected by mistake.
There are supposed to be jumpers across the Pre_Outs to Main In's in the back when you're NOT using external amps. You could substitute short RCA cables.
Answers & Comments
A Mute indicator would tell you if it was muted. Make sure no Tape or Multichannel Input are selected by mistake.
There are supposed to be jumpers across the Pre_Outs to Main In's in the back when you're NOT using external amps. You could substitute short RCA cables.
You're going to need a remote:
http://remotes.com/remotes/servlet/rs?a=...