JVC- red wave on screen and letters doubled
Hello. I ahve a red wave going across my screen and the letters are doubled. Can you help me with answers to fix this problem? Thanks
Televison & Video - JVC - AV-48WP74 48" Rear Projection HDTV-Ready Television
Answers & Comments
Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
- Screen looks 3D
- Colors don't line up
- One or more colors can't be adjusted when using the convergence menu.
- Screen is bowed or warped.
- TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems.
This is a very common failure on these projection sets and a fairly simple DIY fix. All projeciton sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.
Common Symptoms include....
Convergence ic's they align the 3 colors red, green and blue to make a full picture.. when they go out or when 1 does it throws the colors out in the manner you have described.. these are what normal ic's look like.. yours may be different numbers http://www.fixya.com/uploads/images/4790134.jpg