The power cord goes the switch terminal 1 and 3. Terminal 2 must be the opposite of terminal 1, such that when switched on, 1 & 2 connects. Terminal 4 must be the opposite of terminal 3, such that 3 & 4 connects. Under this setup, you may connect red to terminal 2 and black to terminal 4. Be sure of the 1 & 2 pair, as well as the 3 & 4 pair. then, connect the red and black wires. Hope this will help you.
The power cord goes the switch terminal 1 and 3. Terminal 2 must be the opposite of terminal 1, such that when switched on, 1 & 2 connects. Terminal 4 must be the opposite of terminal 3, such that 3 & 4 connects. Under this setup, you may connect red to terminal 2 and black to terminal 4. Be sure of the 1 & 2 pair, as well as the 3 & 4 pair. then, connect the red and black wires. Hope this will help you.
The power cord goes the switch terminal 1 and 3. Terminal 2 must be the opposite of terminal 1, such that when switched on, 1 & 2 connects. Terminal 4 must be the opposite of terminal 3, such that 3 & 4 connects. Under this setup, you may connect red to terminal 2 and black to terminal 4. Be sure of the 1 & 2 pair, as well as the 3 & 4 pair. then, connect the red and black wires. Hope this will help you.
Answers & Comments
The power cord goes the switch terminal 1 and 3.
Terminal 2 must be the opposite of terminal 1, such that when switched on, 1 & 2 connects. Terminal 4 must be the opposite of terminal 3, such that 3 & 4 connects.
Under this setup, you may connect red to terminal 2
and black to terminal 4.
Be sure of the 1 & 2 pair, as well as the 3 & 4 pair.
then, connect the red and black wires.
Hope this will help you.
The power cord goes the switch terminal 1 and 3.
Terminal 2 must be the opposite of terminal 1, such that when switched on, 1 & 2 connects. Terminal 4 must be the opposite of terminal 3, such that 3 & 4 connects.
Under this setup, you may connect red to terminal 2
and black to terminal 4.
Be sure of the 1 & 2 pair, as well as the 3 & 4 pair.
then, connect the red and black wires.
Hope this will help you.
have you got schematic of the wiring
Have got a schematic of the wiring diagram