Lanier 5622 Prints vertical lines
Hello,
I have a Lanier 5622 that had its toner replaced about a month ago. Now I have vertical lines printing on all my printouts and copies. This started about 20-30 days later so I dont know if the problem can be attributed to the toner but even if i copy a "Blank Page" the streaks still show up. There are no errors appearing on the display panel. I tried installing a new fuser and maintenance kit today but the problem persist. I also cleaned a long rectangular glass that slides out by the toner but the alas the problems continue. I've tried cleaning everything but lines still appear. Any help or ideas would GREATLY be appreciated
I have a Lanier 5622 that had its toner replaced about a month ago. Now I have vertical lines printing on all my printouts and copies. This started about 20-30 days later so I dont know if the problem can be attributed to the toner but even if i copy a "Blank Page" the streaks still show up. There are no errors appearing on the display panel. I tried installing a new fuser and maintenance kit today but the problem persist. I also cleaned a long rectangular glass that slides out by the toner but the alas the problems continue. I've tried cleaning everything but lines still appear. Any help or ideas would GREATLY be appreciated
Office Equipment & Supplies - Ricoh - CL4000DN Laser Printer
Answers & Comments
Bad PCU
You could remove the color and black&white drum units and check from below the units to visually observe lines on all the 4 drums. If so, you have to change the drum unit/units. Drums occassionally get damaged before life this way due to solid toner particles inside the toner bottle.Always "shake the toners very well" before replacement, and if you print rarely, then remove the toners and do the shaking to prevent clogging due to inactivity.