LG-Nortel LDP-7024D Handset connecting to GDK100
I have a LKD-8DS handset connected to an extension on our GDK-100 system. This works fine. I have recently bought a LDP-7024D handset and wish to use it on the same extension. When I plug it in there is no dial tone and the display reads:
LDP-7024D V1.2C
Scout-DX V1.1 OK SYNC
Please help!
Lands Phones - Nortel
Answers & Comments
LKD-8DS and GDK-100 are not compatible no matter what any one says i have had a look and just called them just so i can clear this up so if u think different just pop a call in to there serbvice center
See link about LDP-7000 series basic functions. May helps
http://www.promelit.gr/downloads/manual/7016D24D_user_Guide.pdf
Try this
option 3 on the dial pad, then hit hold and then reset the system.
Robert
How dop you know that the LDP-7024D headset is compatible with your GDK-100 system , did you ask the retailer before buying?
That can be the problem.
The indications and the pdf said that LKD-8DS it is compatible with voxnet and with LG Aria (Lucky Goldstar).
Please kindly indicate where it does say that LKD-8DS and GDK-100 are compatible.
Click this link
http://downloads.avoxsolutions.com/VOXNET_Supported_PBX_types.pdf
thanks for fixya
Hi.. it need to register that due to the network connection.. and also see that whether the handset setting's are correct.. thank u ...
You cant use 2 different models on the one line. Thats what my phone company said to me
Its nothing to do with registration.
LG-Nortel LDP-7024D Handset MANUAL DOWNLOAD
Try to check the telephone wire connections. or try to use the other phone box to test.
try to use the phone on the other extension or into other box.. we will test and check if your phone was still functioning/working.
To restore/reset the unit
- Mode Use [NEXT] or button to select the RESTORE COS MODE.
- Press [OK] or button.
- Enter the password (5 digits)to change RESTORE COS MODE.
- Press [OK] or button