lights come on but when i start the ignition switch unless my battery has charging leads connected (in which case it starts immediately) it wont start. Tried to bump start it but fund it extra difficult gto get into first or any gear, was clicking and moving but wouldnt quite click into gear, Finally after charginging with pals leads again, started immediatly, went into gear as usual, rode for a bit got off, turned her off and back on again and same problem, switch wouldnt start again???Please help me, im a girl hahaha
Hi Carrie, If you have a multi-tester,or access to one,your battery voltage should be 12 volts W/ engine off;'13/13.5 with engine running.That shows you the bike's charging system is working. From my experience, if the battery is 2 or more years old replace it. YOU GO GIRL! keep the shiny side UP! Best O'Luck
Answers & Comments
Hi Carrie, If you have a multi-tester,or access to one,your battery voltage should be 12 volts W/ engine off;'13/13.5 with engine running.That shows you the bike's charging system is working. From my experience, if the battery is 2 or more years old replace it. YOU GO GIRL! keep the shiny side UP! Best O'Luck