Line not in sync with specific bitrates
The cellpipe 20 H cpe is directly connected to the MDF.So there is not much copper wire involved.
- It is seen that the modem never syncs with 1088kbps (fixed and rate adaptive)
Configuration mode = 2 wire.
-It is also seen that some times modenm doesn't syc with 512, 1152 kbps etc .But by adjusting the current noise margin it is able to synchronize.
-If you connect other modem (say .. speedtouch ) the line does synchronize without any problems.
- One more question is that whether 2312 bitrate is supported for 2 wire?
Regards,
Sandeep
- It is seen that the modem never syncs with 1088kbps (fixed and rate adaptive)
Configuration mode = 2 wire.
-It is also seen that some times modenm doesn't syc with 512, 1152 kbps etc .But by adjusting the current noise margin it is able to synchronize.
-If you connect other modem (say .. speedtouch ) the line does synchronize without any problems.
- One more question is that whether 2312 bitrate is supported for 2 wire?
Regards,
Sandeep
Computers & Internet - Lucent - CellPipe 20H Router