It should be right above the left side driveaxle. Disconnect the electrical connector from the light switch, Unscrew the switch from the case and remove the gasket, Install a new gasket, screw in the new switch and tighten it securely. Reconnect the electrical connector, then check the operation of the lights.
Answers & Comments
It should be right above the left side driveaxle.
Disconnect the electrical connector from the light switch,
Unscrew the switch from the case and remove the gasket,
Install a new gasket, screw in the new switch and tighten it securely.
Reconnect the electrical connector, then check the operation of the lights.