access router Click on Wireless Set/CHANGE SSID (save)
click on Wireless Security Change Disabled to WEP choose 64 bit or 128 bit create PASS PHRASE - any common word, about 8 characters long REMEMBER THIS Click Generate
this will deliver a series of KEYs. Write (1) KEY down and bring it to your known wireless devices (laptops, desktops, etc).
Save & power cycle all devices connected (this will reset all wired connections as well)
go over to your wireless devices, re-identify connection. you will need the KEY. Carefully enter in all letters and confirm. save these settings.
This should cure your problem. and never run a nekid wireless system unless you want others to access.
Added solution:
in Basic Setup, around the DCHP Setup you can also limit the number of users. My calculations are normally - Number of Wired Connections + Number of Laptops +1 for emergency service. This will allow X+1 connections, therefor limiting the number of potiential users to be able to grab an IP Address.
Best of luck!
If you have further issues, please contact me at 906-495-1707 or via YIM [email protected] or through this website.
Answers & Comments
Setup WEP Security Access....
LINKSYS ROUTER:
access router
Click on Wireless
Set/CHANGE SSID (save)
click on Wireless Security
Change Disabled to WEP
choose 64 bit or 128 bit
create PASS PHRASE - any common word, about 8 characters long REMEMBER THIS
Click Generate
this will deliver a series of KEYs. Write (1) KEY down and bring it to your known wireless devices (laptops, desktops, etc).
Save & power cycle all devices connected (this will reset all wired connections as well)
go over to your wireless devices, re-identify connection. you will need the KEY. Carefully enter in all letters and confirm. save these settings.
This should cure your problem. and never run a nekid wireless system unless you want others to access.
Added solution:
in Basic Setup, around the DCHP Setup you can also limit the number of users. My calculations are normally - Number of Wired Connections + Number of Laptops +1 for emergency service. This will allow X+1 connections, therefor limiting the number of potiential users to be able to grab an IP Address.
Best of luck!
If you have further issues, please contact me at 906-495-1707 or via YIM [email protected] or through this website.