Loud banging during kneading
After two years, my machine has developed a loud banging sound during kneading. Sometimes it happens once with each revolution of the paddle, sometimes less. The noise is loud enough so I've quit running the machine at night--even half a house away it will wake me up. Sounds like the gearing is slipping, causing a jump before connecting again. Any suggestions?
Kitchen Appliances - Others - Breadman - TR875 Bread Maker
Answers & Comments
The belt was loose, and it often slipped out of the notches during the kneading cycle and the result was a loud banging noise , you can try checking that belt if you can open the unit or just have it repair or replace...
Good luck.........
Most like ly that is the case a gear has ground down teeth and spins until it catches which creates the banging noise. unfortunately it would cost more to repair it than to replace it. most aplliance repair places might not even have the parts for it. so your best bet is just to get a new one. I'm sure this is not the answer you were looking for but it's the right one good luck. please rate this solution. thanks
Usually with products like this, one gear will be a plastic instead of metal which under too much stress will shear. Basically to narrow down the problem, you will need to open up the machine and find the part that is worn down considerably and then we can get you to the manufacturer or another retailer that can get you the replacement part
You are right.for further help check this link.
www.repairclinic.com
you will have to replace the kneading paddels for sure to solve this problem.as simple oiling may work temprory but for permanent solution replacing the kneading paddels is necessary.remaining everything is perfect in the bread maker.
for any thing else let me know.
pls do rate the solution
thanks.
regards.
fixya expert team