The error means the fuser unit on your printer may possibly be defective or have a problem. Try switching printer off at the wall, waiting a few minutes and turning it back on. If the same message repeats itself after each time (try it a few times), the fuser unit will need to be replaced. The problem is that it is not heating up enough to allow the toner to fuse properly to the printer paper. (it needs neat for this which the fuser unit is obviously not producing).
Answers & Comments
Hi there,
The error means the fuser unit on your printer may possibly be defective or have a problem. Try switching printer off at the wall, waiting a few minutes and turning it back on. If the same message repeats itself after each time (try it a few times), the fuser unit will need to be replaced. The problem is that it is not heating up enough to allow the toner to fuse properly to the printer paper. (it needs neat for this which the fuser unit is obviously not producing).