Ok, but does the compressor shaft stall, at each A;/C drop out. that is 1st. check on all A/C cars. that is the clutch there, if the clutch drops out that means the logic , sees ERRORS> we can work that issue easy but i need the shaft answer. do not confuse, spinning pulley with shaft. first makes sure the belt is tight. then see if it drops out.
Answers & Comments
Ok, but does the compressor shaft stall, at each A;/C drop out.
that is 1st. check on all A/C cars.
that is the clutch there, if the clutch drops out
that means the logic , sees ERRORS>
we can work that issue easy but i need the shaft answer.
do not confuse, spinning pulley with shaft.
first makes sure the belt is tight. then see if it drops out.