Usual cause is you have failed to adequately lubricate the nailer. Put at least 12 drops of air tool oil in the air inlet. Force the pin back and cycle the unit once. Put more oil in and repeat a few times. This may restore operation. Do not fail to lubricate since the seals could be damaged if run dry and then you have to rebuild the unit.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Usual cause is you have failed to adequately lubricate the nailer.
Put at least 12 drops of air tool oil in the air inlet.
Force the pin back and cycle the unit once.
Put more oil in and repeat a few times. This may restore operation.
Do not fail to lubricate since the seals could be damaged if run dry and then you have to rebuild the unit.