Try the following: 1. Try replacing the IDE cable or SATA cable of your hard disk. 2. Check the power cord if it is properly seated at the hard disk. 3. If you are using IDE hard drive. Check master or slave setting. 4. If you added a cd/dvd rom make sure it is set to a slave. 5. Try replacing another hard drive. Check if it works. Thanks. More Power. Please rate. Let me know if you need further assistance.
Answers & Comments
Try the following: 1. Try replacing the IDE cable or SATA cable of your hard disk. 2. Check the power cord if it is properly seated at the hard disk. 3. If you are using IDE hard drive. Check master or slave setting. 4. If you added a cd/dvd rom make sure it is set to a slave. 5. Try replacing another hard drive. Check if it works.
Thanks. More Power. Please rate. Let me know if you need further assistance.
Hi,
Shutdown the system and remove all power from the computer. You might need to reseat the hardrive as it it might have come loose.
Then power it back on to try again.
Thanks for using Fixya
Proton