Insert the stock into the printer so that the label is below the printhead and resting above the rubber roller.
Close the thermal printhead so that it is resting on top of the paper.
Some models may have a switch on the printer to switch from transfer roller or thermal. Make sure it is set for thermal.
Turn the printer on.
Load up you UPS software. If this is a first time installation and you are using software from UPS, you may have to tell it in the printer setup setting what printer you are using so that the form settings can be transferred to the printer.
Answers & Comments
Turn the printer off.
Release the thermal print head from the platen.
Insert the stock into the printer so that the label is below the printhead and resting above the rubber roller.
Close the thermal printhead so that it is resting on top of the paper.
Some models may have a switch on the printer to switch from transfer roller or thermal. Make sure it is set for thermal.
Turn the printer on.
Load up you UPS software. If this is a first time installation and you are using software from UPS, you may have to tell it in the printer setup setting what printer you are using so that the form settings can be transferred to the printer.