In the unlikely event Ulterra will not trim or stow, the following procedure will reset the motor and restore functionality: Press and hold the POWER button located at the mounting base to turn power off (green LED light will turn off). Press the POWER button until the green LED light illuminates. Wait 3 seconds. https://www.minnkotamotors.com/support/faqs/there-manual-over-ride-function-case-power-loss-or-if-auto-stow-and-deploy-does-not
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
In the unlikely event Ulterra will not trim or stow, the following procedure will reset the motor and restore functionality:
- Press and hold the POWER button located at the mounting base to turn power off (green LED light will turn off).
- Press the POWER button until the green LED light illuminates.
- Wait 3 seconds.
https://www.minnkotamotors.com/support/faqs/there-manual-over-ride-function-case-power-loss-or-if-auto-stow-and-deploy-does-not