Mitsubishi WS-55908 Rear Projection. Doesen't Stay on
Mitsubishi WS-55908. Rear Projection...
The TV doesn't turn on or doesn't stay on.
When I turn it on the power button lights up like it's coming on for about 3 sec then it goes out. Like it is turned off.
What is the problem?
Televison & Video
Answers & Comments
Have you tried to access the self diagnosis feature by holding the menu and device/input buttons on the set both in together for five seconds to see if the led will blink a two digit code such as two blinks pause two blinks for a 22 error? Try that and let me know the blink code and i can assist you.
yes thats the code for short protect. The first thing to check is two green pico fuses on the center board with an ohms meter. They are in the photo if either of them are open ( no continuity) that means the convergence Ics and picos need to be replaced.They are located just to the left of the large capacitors and will have f9A04 and F9A05 stamped on the board