You will need to adjust the H needle on the carburetor. If there are the red and white plastic limiters on the tips, remove them. To adjust the H needle, fully depress the throttle at the same time turning the needle counter clockwise in quarter turn increments. Use your ear to hear when you hit the sweet spot
It has different needles not set screws, but got it. Thanx saved me a few $$. U rock!!It has different needles not set screws, but got it. Thanx saved me a few $$. U rock!!
Answers & Comments
You will need to adjust the H needle on the carburetor. If there are the red and white plastic limiters on the tips, remove them. To adjust the H needle, fully depress the throttle at the same time turning the needle counter clockwise in quarter turn increments. Use your ear to hear when you hit the sweet spot
It has different needles not set screws, but got it. Thanx saved me a few $$. U rock!!