My behringer powermixer is making a clicking
One of the speakers was unpluged durring use it had made a spark and was pluged back in sound shut off from the powered mixer it still was reading on the eq that it was still picking up sound but was not sending to the speakers. now i unpluged both cords that go to the speakers from the mixer and i get a clicking sound.i can plug my head phones in and it works just fin just no output from the back outlets to the speakers.
Car Audio & Video - Behringer - POWERED MIXER, 20 CH, 400 WTS AMPLIFIER => Model PMX5000 Car...
Answers & Comments
You have blown the power amps in the unit. This is why you must insure that the speaker leads cannot be unplugged while unit is powered.
I don't know what model mixer you have, but ones like PMP3000, PMP5000, PMP1280S use a switching class D amp that arcs through a circuit board.
One can get a replacement:
http://www.fullcompass.com/product/375886.html
I have NOT done business with this company before but you need to see if the HCA2400 module is what you have in your unit. Note that it has covers on the unit pictured at the site when installed.
I have repaired these, but it is an extensive process including carving out burned board material and replacing many components.