My Bosch Nexxt 300 washer seems to be jumping stages in the cycle program. It starts the normal cycle with 60 min to go, but as soon as the water is filled it drops to 57 min. Also, in the spinning cycle, the water drains and the machine just turns gently, with no spinning and the timer drops from 6 min to 0. Any ideas? Apart from those, the machine washes nicely. Thanks
Washing Machines - Bosch
Answers & Comments
Iit could be that your machine is not pumping all the water out down to a level that allows the cycle to continue,unplug the machine and try to blow down the outlet pipe,if you cannot then (only if your confident)remove the back cover and disassemble the water pump to remove the blockage,reassemble and try again.eric992