This unit has a reset button on the side of the hood. Recline handle, turn power switch on, pressing down in carpet mode, press reset buttonon the side of the hood, the brush should turn on.
If the belt isn't broken and the brush still doesn't spin, you may try putting a few turns of electrical tape around the area on the brush roll where the belt attaches-- it will increase the tension on the belt and get it spinning again. Worked in my case anyway.
Answers & Comments
This unit has a reset button on the side of the hood. Recline handle, turn power switch on, pressing down in carpet mode, press reset buttonon the side of the hood, the brush should turn on.
If the belt isn't broken and the brush still doesn't spin, you may try putting a few turns of electrical tape around the area on the brush roll where the belt attaches-- it will increase the tension on the belt and get it spinning again. Worked in my case anyway.