Turn off the power and remove the needle and presser foot. Remove the needle plate, bobbin and bobbin case. Clean the shuttle and surrounding area. Replace everything. Make sure the flat side of the needle faces to the back of the machine. Raise the presser foot and re-thread the machine.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Turn off the power and remove the needle and presser foot.
Remove the needle plate, bobbin and bobbin case.
Clean the shuttle and surrounding area.
Replace everything.
Make sure the flat side of the needle faces to the back of the machine.
Raise the presser foot and re-thread the machine.