Connect a LAn cable from Emax to your PC.Go to Network Connection and find LOCAL Area Connection and right click it,select properties,select TCP/IP and click properties.Select USE THIS IP ADDRESS 192.168.2.10 leave subnet mask as appear and select OK.Then try to log in the setup page 192.168.2.1 the password is 1234/userr is admin. andConnect a LAn cable from Emax to your PC.Go to Network Connection and find LOCAL Area Connection and right click it,select properties,select TCP/IP and click properties.Select USE THIS IP ADDRESS 192.168.2.10 leave subnet mask as appear and select OK.Then try to log in the setup page 192.168.2.1 the password is 1234/userr is admin. and
OK, so I used the wizard for Windows 7, got all the way to the end, but now it's stuck on 'saving' with only 3 out of 10 bars green.OK, so I used the wizard for Windows 7, got all the way to the end, but now it's stuck on 'saving' with only 3 out of 10 bars green.
Answers & Comments
Go here ->Edimax and run the wizard.Post back.
Connect a LAn cable from Emax to your PC.Go to Network Connection and find LOCAL Area Connection and right click it,select properties,select TCP/IP and click properties.Select USE THIS IP ADDRESS 192.168.2.10 leave subnet mask as appear and select OK.Then try to log in the setup page 192.168.2.1 the password is 1234/userr is admin. and
OK, so I used the wizard for Windows 7, got all the way to the end, but now it's stuck on 'saving' with only 3 out of 10 bars green.