My control is very loose and it causing me to miss the gear when I shift.. it won't shiftinto gear until I try a few times then its ok..had it to the dealer today but I guess it didn't work with him doing it..he was the dealer,not the mechanic..lol....want to do my self now...pls explain how.....I am a female and this is my first motorbike....and am learning..PLS HELP..lol what part do I tighten>??
Motorcycles - Johnny - Jet CTech - 2009 Johnny Pag Spyder
I am not familiar with your particular bike but for the most part they are all alike. There should be a small bolt on the end of the shift pedal. Tighten it up; it probably requires a 10mm wrench. Some bikes will have a linkage at the end of the shift pedal. The rod connecting the linkage will connect to the shift shaft using a small bolt as above. Tighten the bolt. Below is a diagram showing a linkage connection. In either style, the bolt to tighten is the one connected to the shift shaft.
Answers & Comments
I am not familiar with your particular bike but for the most part they are all alike. There should be a small bolt on the end of the shift pedal. Tighten it up; it probably requires a 10mm wrench. Some bikes will have a linkage at the end of the shift pedal. The rod connecting the linkage will connect to the shift shaft using a small bolt as above. Tighten the bolt. Below is a diagram showing a linkage connection. In either style, the bolt to tighten is the one connected to the shift shaft.