IF IT WAS LIKE MINE , IT WAS THE P.O.S. THERMO SWITCH. SOME WHERE THERE IS INFO FOR A REPLACEMENT PART AVAILABLE TO REPLACE THIS JUNK SWITCH, I GOT MINE FROM AMAZON. THE OLD SWITCH IS A BLACK SEMI -ROUND UNIT THAT IS BEHIND THE BACK COVER. THE BAD SWITCH IS A WEAK LINK TO THIS UNIT. ITS HELD IN PLACE BY A SCREW ON THE BOTTOM OF THE THERMOSWITCH. JUST REPLACE THE WHOLE DEFECTIVE SWITCH, I DID IT TO MINE AND NOW THE THING WORKS WELL. JUST UNSCREW,UNPLUG, AND ISTALL THE NEW THERMO SWITCH. GOOD LUCK....PS...MAKE SURE THE UNIT IS UNPLUGD!
Answers & Comments
IF IT WAS LIKE MINE , IT WAS THE P.O.S. THERMO SWITCH. SOME WHERE THERE IS INFO FOR A REPLACEMENT PART AVAILABLE TO REPLACE THIS JUNK SWITCH, I GOT MINE FROM AMAZON. THE OLD SWITCH IS A BLACK SEMI -ROUND UNIT THAT IS BEHIND THE BACK COVER. THE BAD SWITCH IS A WEAK LINK TO THIS UNIT. ITS HELD IN PLACE BY A SCREW ON THE BOTTOM OF THE THERMOSWITCH. JUST REPLACE THE WHOLE DEFECTIVE SWITCH, I DID IT TO MINE AND NOW THE THING WORKS WELL. JUST UNSCREW,UNPLUG, AND ISTALL THE NEW THERMO SWITCH. GOOD LUCK....PS...MAKE SURE THE UNIT IS UNPLUGD!
Can you post the part number you bought? Thanks
I had same problem with mine and found out that the timer was turned on make sure your timer time is set to 00 hope this helps