My danze D455612 is leaking and i think it might be an o ring problem. How do i pull it apart. I have taken off the top part but i am up to go any further
I have never taken apart that model before but they are all relatively similar.
The first step is to close the water supply. Remove the handle. Either a set screw or nut around the valve stem (packing nut) will be holding the cartride in place.
Once the valve stem/cartridge has been removed then all of the o-rings are evident....replace all of them and the large flat washer at the end of the stem (if there is one0.
Answers & Comments
I have never taken apart that model before but they are all relatively similar.
The first step is to close the water supply.
Remove the handle.
Either a set screw or nut around the valve stem (packing nut) will be holding the cartride in place.
Once the valve stem/cartridge has been removed then all of the o-rings are evident....replace all of them and the large flat washer at the end of the stem (if there is one0.