There is 2 screws if you look at the bottom, where the cable is wind. you can seethem through the winding wheel. I had a completly dead machine, by removing these screws i could replace the cable and my machine works again :-)
Thanx, Magnus, that did the trick. Thanx, Magnus, that did the trick.
Same problem here. Anyone know how to take these machines apart? There isn't a screw hole in sight
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
There is 2 screws if you look at the bottom, where the cable is wind. you can see
them through the winding wheel. I had a completly dead machine, by removing these screws i could replace the cable and my machine works again :-)
Thanx, Magnus, that did the trick.
Same problem here. Anyone know how to take these machines apart? There isn't a screw hole in sight