Install a brand new needle. Remove the top thread from the machine (ALWAYS cut the thread at the spool, raise the presser foot, and pull the thread down through the needle eye.) ALWAYS RAISE the presser foot and rethread from the beginning. Verify the thread path is correct. If it still does not sew properly or sounds clunky, take it for service. It could have been knocked out of time or bent something.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Install a brand new needle.
Remove the top thread from the machine (ALWAYS cut the thread at the spool, raise the presser foot, and pull the thread down through the needle eye.)
ALWAYS RAISE the presser foot and rethread from the beginning. Verify the thread path is correct.
If it still does not sew properly or sounds clunky, take it for service. It could have been knocked out of time or bent something.