My Fisher & Paykel OS302 Oven will not heat with any element. I have gone through the service manual and fault diagnostic sand replaced some parts that didn't help
I have checked the door switch, tested the power transformer, microtemp limiter, and thermal fuse. I have 240 volts to the oven. When I turn it on I hear the relays click but the elements do not get hot. I show 120 volts at an element, so it's like there is something I've missed holding back one leg of power.
Dryers - Fisher
Answers & Comments
It should read 120v from center post (neutral) to each separate outside post and then 240v across outside posts.
Thanks for the quick reply Chris. Yes, I have that voltage there. It must be something small I’m overlooking.